Edelbrock AVS2 650 CFM Carburetor Air & Fuel Filter Bundle

Get the complete bundle of everything you need for a successful carburetor installation and enjoy 5% off with this kit. It comes with a 650 CFM AVS2 electric choke carburetor, a 14” Signature Series chrome air cleaner with a 3” tall filter element (#1221), a #8126 chrome fuel inlet pipe, and a #8750 Clear View fuel filter.

The AVS2 features annular flow primary boosters to improve fuel atomization, thereby eliminating flat spots when the carb transitions from idle to full throttle and delivering a crisp throttle response. The 650 CFM model is perfect for small-block and some big-block applications with single- or dual-plane intake manifolds. The chrome fuel inlet pipe tucks away close to the carburetor for a clean, uncluttered engine bay. It features a 3/8" barbed end for simple rubber fuel hose applications. The Clear View fuel filter is universal, allowing you to adapt a variety of inlet hose sizes to a 3/8" outlet, which matches the fuel inlet pipe. The clear quartz glass gives you a quick indication of fuel quality and presence. Machined aluminum ends are E-coated with a durable deep black finish. This kit contains everything you need in one package to change your carburetor quickly and easily.

BUNDLE INCLUDES THE FOLLOWING COMPONENTS

EDELBROCK #1906 AVS2 CARBURETOR
The Edelbrock AVS2 Series #1906 is a satin-finished four-barrel carburetor with electric choke that is designed and calibrated for optimum street performance in engines that require an air-fuel flow of 650 CFM. The AVS2 is a perfect replacement or upgrade that features annular flow primary boosters with a new calibration for improved off-idle and cruising performance. The annular flow booster design delivers improved fuel atomization to eliminate flat spots that may be encountered as the carburetor transitions from idle to full throttle. Each annular flow booster features eight equally spaced orifices to improve fuel metering from idle to the main circuit. The improved flow metering makes this carburetor ideal for use with a wide variety of small- and big-block engines with either dual- or single-plane intake manifolds. The Edelbrock AVS2 #1906 includes both timed and full vacuum ports for ignition advance. It comes with: .101 primary and.098 secondary metering jets; .070 x .037 metering rods; orange (5" Hg) step-up spring. Use our Carburetor Stud Kits #8008 or #8024 if needed. Match with a variety of manifolds that include Edelbrock Performer, Performer EPS, RPM Air-Gap, Performer RPM, Torker II or other brands of similar design. For a black-finished AVS2 with electric choke, order part #19063.

EDELBROCK #1221 AIR CLEANER
Edelbrock triple chrome-plated round air cleaner #1221 works with all popular 5-1/8" diameter carburetors (Performer Series, Thunder Series AVS, Holley, Thermo-Quad, Quadrajet and Carter AFB). The 10" and 14" models have knock-outs in the air cleaner base for use with Edelbrock crank case ventilation adapter #1205 (sold separately). #1208, #1209 and #1221 fit all Edelbrock carburetors. Heights of air cleaners are in parentheses, measured from the gasket flange to the top of the supplied retaining nut. Dimensions are accurate within 1/8".

EDELBROCK #8126 FUEL INLET
This Edelbrock #8126 Chrome Steel Fuel Inlet for Edelbrock carburetors provides a clean and custom plumbing solution. The drop-down design routes the fuel line on the right-hand (passenger side) of the carburetor below the linkage and choke housing. Includes a barbed end for a push-on 3/8" rubber fuel line. The Edelbrock #8126 is manufactured of plated steel and includes a 5/8" -20 threaded banjo bolt with gaskets.

EDELBROCK #8750 CLEAR VIEW FUEL FILTER
The Edelbrock Clear View Fuel Filters dress up any carbureted car’s engine bay and provide a quick visual check of fuel flow and fuel condition. Fully machined aluminum ends are E-coated for durability with laser inscribed details. The 100-micron filter keeps dirt and debris from clogging up the small passages of your carburetor. Filter elements are easily replaced using kit PN 8749. PN 8750 includes multiple interchangeable injection-molded threaded nipples to fit ¼”, 5/16” or 3/8” i.d. hose sizes.

EDELBROCK #8008 STUD KIT
Edelbrock #8008 Carburetor Stud, Nut and Washer Kit